Pipkins or Thimble-holders

Mimi has made the pipkins for several years now.  She started making these cute little holders to keep the grandchildren away from the thimbles.  Several people have inquired about these, so we thought this would be a good start for our little adventure.

finished pipkin

For this project you will need the following list:

  1. fabric of your choice
  2. glue
  3. felt
  4. cardboard (cracker box or cereal box)
  5. quilting thread
  6. thread that matched the fabric you used
  7. frixion pen ( this pen will disappear when heated)
  8. embroidery thread ( optional)

First thing, draw a football shape the size you would like your pipkin.  We used the dimensions 3 1/4th in. by 1 3/4th in.  These can be made any size you would like.

Drawing pipkin2   Drawing pinkin3

When you have these the size you would like, cut 3 out of the cardboard.

cutouts

At this point, you will need three more about 1/8th in. smaller.  These will form the interior of the pipkins, once you have done this lay these aside we will come back to them a little later.

Now take the larger cardboard shape footballs and glue one side of them to a piece of felt as shown in the picture below.

gluing felt

Once dry cut them out.

cutting felt

On the three larger football shapes, draw the outline using the frixion pin onto the fabric and embroidery if desired.

marking shape         sewing designs

Once you have completed this, you will need to cut out the football 1/2 in. larger than the drawn lines on the fabric.

side of pipkin

You will need to use a gathering stitch about 1/8th in. from the outside of the football shape.

running stitch

Before gathering the football, place the cardboard/felt shape, that we previously glued, placing the felt side down, then pull one side so it will gather around all the sides as shown in the following picture.  All three of the larger shapes should be done the same way.  You will also need to gather the fabric around the smaller shapes, that we have set aside earlier.  These smaller shapes do not have the felt glued on them.

gathering

Glue the wrong sides of the small and large pipkins together, and clamp until they are completely dry.  We normally do them and leave them clamped over night.

clamping

Now they are ready to be stitched together.  Hold the bottom side and one side together and stitching them together with a blind hem stitch.  This will hold the two sides securely together.

sewing pipkin

Once that side is completed, the remaining side needs to be done the same as the side you just completed. Leaving the top side open but stitching about 1/2 in. on each side to secure it together.

The opening or mouth of the pipkin should look like the following picture:

open pipkin

The finished products

finished pipkin

 

If any of the ink from the fixion pen remains, heat it with a blow dryer and it will fade away.

 

 

 

3 Responses to “Pipkins or Thimble-holders”

  1. Roberta Says:

    Love it!

  2. peggy farrell Says:

    oh I just love these

  3. peggy farrell Says:

    I just love these

Leave a Reply

Seo wordpress plugin by www.seowizard.org.